Available on Pre-order

Lumatek LED Zeus 600W 2.6
  • Description

Lumatek Zeus 600W 2.6 LED producing a PPF of 1570µmol/s and a high efficacy of 2.6 µmol/J  

Lumatek as always, leading through innovation and now presenting the Zeus 600W Standard with a higher PPF Output and industry leading €/ µmol ratio.

Pioneers of the innovative, modular, magnetic LED light bar design.

With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) ensuring an even light distribution and uniform spread.

The array of the Zeus 600W 2.6 creates a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents. This fixture will cover perfectly 1.4×1.4m for Flowering and 1.5×1.5m for Veg.

The new Zeus line is built using high quality Lumatek drivers and top bin LEDs from Lumileds and Osram, generating a full-spectrum light source ideal for veg and flowering cycles. Another new feature of this line is the Clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.

For different cultivars, propagation and vegetative growth periods the Zeus 600W 2.6 may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with 6 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

External Control
This Lumatek LED fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode.

Universal Control Systems Compatibility

Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

  • PRODUCT CODE: LUMLED020
  • EFFICACY: 2.6 µmol/J
  • PPF: 1570 µmol/s
  • INPUT VOLTAGE: 220-277V, 50-60Hz
  • INPUT POWER (100%): 615W
  • FOOTPRINT: 1.4x1.4m
  • WATERPROOF: IP65
  • LIFETIME: +60 000 hrs
  • LIGHT DISTRIBUTION: 120°
  • LIGHT SOURCE: Osram and Lumileds Diodes
  • DIMMABLE: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
  • EXTERNAL CONTROL: With Lumatek Digital Panel Plus 2.0 or Universal Controllers 0-10V
  • WEIGHT: 13.5 Kg
  • DIMENSIONS: 1091x1182.4x81.2mm
  • SPECTRUM: Full Spectrum +
  • BTU (WITH DRIVER ATTACHED): 2115 BTUs/h
  • BTU (WITH DRIVER REMOTE): 1996 BTUs/h